Automet® FAB - Vector Error Graphical Report - Analysis Tools

Vector error graphical analysis is used to access and manipulate survey data; it also displays survey information such as flange thicknesses and the types of devices used.

• The fit check box allows you to include spool elements in the fit. Unchecking this box removes that item from the mathematical best-fit analysis, but does not remove the values from the report.
• The zero check box forces the flange to zero the error at this element. The default is no flange zeroed and all flanges show the best fit.
• Show for circle fits reveals or hides the circle fit values on the report.

• 
  Flange 01
• 
  Flange 02
• 
  Flange 03

Flange 01	Flange 02	Flange 03
Surveyed using type 1 device.	Surveyed using type 7 device. On the back face of flange (indicated by the D).	Surveyed using type 7 device. On the front face of flange.
Length is being considered. Fit preference is position.	Length is being considered. Fit preference is position.	Length is being considered. Fit preference is position.
No offset when using type 1.	Offset when on back is the full flange thickness including the raised face beacuse D points taken on the back of the flange.	Offset when on front is the raised face only.
	The initial value for thickness is our database value which can be changed at any time but is retained for future reference.	The initial value for thickness is our database value which can be changed at any time.